Hi, i have a TeraStation PRO TS-HTGL/R5 and a 1.5TB external USB drive that is connected to it. I started a backup yestertay and its still only at 20%. Even though its about 1,1 TB of data that has to be backuped this seems awfully slow to me. Is this normal? The external USB drive is a Verbatim, so it should support speeds bigger than this.
I have also formtatted the USB drive in XFS, so this cant be the problem
Did you create a backup plan in the Terastations GUI or did you map the drive in my computer and manually copy/paste. Have you tried more than one USB disk to ensure its not the USB disk thats at fault?
Thats the reason i bought an external USB drive to backup the files on the terrastation so in case of a failure of the terrastiation not everything is lost.
Yes i created a backup plan in the webgui. Right now its at 24% after about 10h.
As there is no option to chancel the backup and try something else i think i simply have to let it finish wich will prolly take another 2 days.
It wouldve been a lot faster if i simply copied the files from my webshare to the usb disk.
Well you are transfering a large amount if data (1.5TB) USB 2.0 usually transfers at a rate of 20-25MB/s which equals 72000MB an hour (70 - 72GB roughly), times 10 hours = 670GB
Your transfer rate would seem a bit slow but if you are indexing alot of file then id say it would be acceptable and to be expected to be honest.
I have similar problem also on my TS-III pro. I do "Differential Backup" every night. There is about 20G of data.
It still takes over 2 hours to complete this backup! And there is no new or modified files at all.
I think there is some problems in TS. There is lots of thinks wrong in TS :)
Don't really know why they bring so incomplete device to the market.
I think I have to return my device to dealer and buy working one :(
Backing up to external USB drive is painfully slow. Last I clocked 514GB in 96 hours. Big files help, a lot of small files slow it to a crawl. Using an external computer to do the copy, and a program like teracopy or fastcopy is about 10x faster in my tests (going from internal share to external USB drve attached to the same NAS, tested with LS-W1.0TGL-R1 , LS-CH1.0TL-R , and LS-WX2.0TL/R1). Diff mode backup is quite fast, usually 10-20 min with a few file changes, on about 1TB of data, mixed file sizes. There is a diff complete and a diff - you want the last option in the menu, "diff" for speed, not the "diff complete".
Browser ID: smf
(is_webkit)
Templates: 1:
Printpage (default).
Sub templates: 4:
init,
print_above,
main,
print_below.
Language files: 1:
index+Modifications.english (default).
Style sheets: 0:
.
Hooks called: 75 (
showintegrate_autoload, integrate_pre_load, integrate_load_session, integrate_verify_user, integrate_pre_load_theme, integrate_user_info, integrate_load_board, integrate_board_info, integrate_pre_load_theme, integrate_allowed_to_general, integrate_simple_actions, integrate_allowed_to_general, integrate_load_theme, integrate_pre_log_stats, integrate_actions, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_codes, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_pre_parsebbc, integrate_smileys, integrate_smileys, integrate_post_parsebbc, integrate_pre_parsebbc, integrate_smileys, integrate_smileys, integrate_post_parsebbc, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_menu_buttons, integrate_current_action, integrate_theme_context, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general)
Files included: 27 - 1055KB. (
show./index.php, ./Settings.php, (Cache)/db_last_error.php, (Sources)/QueryString.php, (Sources)/Subs.php, (Sources)/Subs-Auth.php, (Sources)/Errors.php, (Sources)/Load.php, (Sources)/Security.php, (Sources)/Subs-Compat.php, (Sources)/Subs-Db-mysql.php, (Sources)/Cache/CacheApi.php, (Sources)/Cache/CacheApiInterface.php, (Sources)/StopForumSpam.php, (Sources)/Subs-Charset.php, (Sources)/Unicode/Metadata.php, (Sources)/Unicode/QuickCheck.php, (Sources)/Session.php, (Sources)/Logging.php, (Sources)/Class-BrowserDetect.php, (Sources)/Unicode/RegularExpressions.php, (Sources)/Unicode/CaseUpper.php, (Sources)/Unicode/CaseTitle.php, (Current Theme)/languages/index.english.php, (Current Theme)/languages/Modifications.english.php, (Sources)/Printpage.php, (Current Theme)/Printpage.template.php)
Memory used: 733KB.
Tokens:
post-login.
Queries used: 10.
[Show Queries]