OK, I have posted a couple times, thanks to your responses... I feel like I'm getting close... I have searched these forums extensively and could not find a solution, if there is one please point me to it...
A rundown:
- I have two LS-WTGL/R1-V3 F/W 3.10's, one as main storage, and then backup jobs created for specific folders that backup to the other.
- Right now, they are on the same network.
- I have users that access the main storage device, they have network drives mapped to the folder that I was trying to backup, but I made sure no one had anything opened during the backup.
- I was getting rsync errors on every job, so I reset both to defaults, then yesterday ran a test backup with a small number of files, it worked perfectly.
- I had a scheduled job set to run last night which failed, the log read...
-------- BEGIN BACKUP 2010/03/12 00:00:03 array1/Closeouts -> LS-WTGLBA5@array1/Q_Backup --------
@ERROR: chroot failed rsync error: error starting client-server protocol (code 5) at main.c(1296) [sender=2.6.8]
-------- END BACKUP 2010/03/12 00:00:09 array1/Closeouts -> LS-WTGLBA5@array1/Q_Backup --------
- Now this morning the folders on the drive that holds the backup files are inaccessible, I can open the root folder, but every subfolder gives me the ol' "you do not have permission to use this network resource."
- Also, I cannot access these folders through the web browser interface, again I can see them but cannot open them
- I did not change any settings after the successful backup, the only difference is it is a different job and targets different folders.
Any ideas why this would have failed? Can anyone explain the error codes that I am getting? Please help!
Thanks in advance
If you are having specific issues with one of the devices as the target then that could cause this issue. I would try to reinitilize the target device again, check all your permissions, if everything looks good for your settings then I would delete the raid array and recreate it and set the device up again.
So now I am using the NAS Navigator and the Storage (target) device says it is unformatted! Anyway to save/access the data?
Deleting the RAID arrayDoes this involve erasing data?
I reinitialized, no help... I cannot set folder permissions, because I cannot access those folders either through windows or through the web admin...
I cannot see FAQ (step 2 of 3), there is just code there... can I get instructions for forcing firmware while in EM mode? Tried searching with no luck...
Thanks!
Browser ID: smf
(is_webkit)
Templates: 1:
Printpage (default).
Sub templates: 4:
init,
print_above,
main,
print_below.
Language files: 1:
index+Modifications.english (default).
Style sheets: 0:
.
Hooks called: 65 (
showintegrate_autoload, integrate_pre_load, integrate_load_session, integrate_verify_user, integrate_pre_load_theme, integrate_user_info, integrate_load_board, integrate_board_info, integrate_pre_load_theme, integrate_allowed_to_general, integrate_simple_actions, integrate_allowed_to_general, integrate_load_theme, integrate_pre_log_stats, integrate_actions, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_codes, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_word_censor, integrate_word_censor, integrate_pre_parsebbc, integrate_bbc_print, integrate_post_parsebbc, integrate_pre_parsebbc, integrate_smileys, integrate_smileys, integrate_post_parsebbc, integrate_pre_parsebbc, integrate_smileys, integrate_smileys, integrate_post_parsebbc, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general, integrate_menu_buttons, integrate_current_action, integrate_theme_context, integrate_allowed_to_general, integrate_allowed_to_general, integrate_allowed_to_general)
Files included: 27 - 1055KB. (
show./index.php, ./Settings.php, (Cache)/db_last_error.php, (Sources)/QueryString.php, (Sources)/Subs.php, (Sources)/Subs-Auth.php, (Sources)/Errors.php, (Sources)/Load.php, (Sources)/Security.php, (Sources)/Subs-Compat.php, (Sources)/Subs-Db-mysql.php, (Sources)/Cache/CacheApi.php, (Sources)/Cache/CacheApiInterface.php, (Sources)/StopForumSpam.php, (Sources)/Subs-Charset.php, (Sources)/Unicode/Metadata.php, (Sources)/Unicode/QuickCheck.php, (Sources)/Session.php, (Sources)/Logging.php, (Sources)/Class-BrowserDetect.php, (Sources)/Unicode/RegularExpressions.php, (Sources)/Unicode/CaseUpper.php, (Sources)/Unicode/CaseTitle.php, (Current Theme)/languages/index.english.php, (Current Theme)/languages/Modifications.english.php, (Sources)/Printpage.php, (Current Theme)/Printpage.template.php)
Memory used: 735KB.
Tokens:
post-login.
Queries used: 10.
[Show Queries]