Hi,
when I switch off and on my Mini Link Station, all information concerning web access is lost. (web access is deactivated, before power off/on it was activated) Why that? Is there any possibility to keep the web access status after power off/ power on?
Gerhard
It should never get deactivated. Make sure that you have the most recent firmware and then update it and reinit the unit.
The latest firmware is installed and I also made an Init.
However, the linkstation keeps only the web access "Allow Anonymous" from the folders setup, but not the settings from the service setup. After power down/power up the Web Access service is always disabled. However, to get an local access to the the link station (with URL:9000/?location=/share/.../ ) using a webbrowser I need the Web access Service enabled.
I never configurated the station for Buffalonas acces, because I use it only in a local network. That means, in the service setup I have the following settings:
Web Access Service enable
Https..... disable
Use BuffaloNas ........... disable
No BuffaloNas settings
DNS any hostname, otherwise I cannot save and enable the Web Access Service
UPNP Auto
Port Any
With this configuration I get a local acces to my link station, but the acces is discontinued afert power off/power on. It had to be configurated newly. How can I avoid this?
I appreciate any help
Gerhard