Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: Marc Lim on April 12, 2022, 05:19:13 AM

Title: LS-W1.0TGL/R1-AP
Post by: Marc Lim on April 12, 2022, 05:19:13 AM
I had this Buffalo Linkstation sometime in 2010. It was left in the warehouse until I unpacked it last week. The disk with the driver cannot be found so I would need help to get this driver to setup the unit. I am using Windows 11.

Model: LS-W1.0TGL/R1-AP
Serial#: 45882390100255
Any help would be highly appreciated
Title: Re: LS-W1.0TGL/R1-AP
Post by: davo on April 12, 2022, 06:40:56 AM
Windows 11 uses SMB2 (minimum), this NAS only has SMB1. Technically you an enable SMB1 on Windows 11 but it's not recommended as it's a major security risk.

You're NAS is basically too old to safely use on a modern OS.
Title: Re: LS-W1.0TGL/R1-AP
Post by: Marc Lim on April 12, 2022, 09:50:37 AM
Thank you Davo
Your reply is highly appreciated

In this case, can I use this as a normal external harddisk? If so, how do I set it up to be one
Title: Re: LS-W1.0TGL/R1-AP
Post by: davo on April 12, 2022, 11:05:42 AM
It cannot be used as a USB HDD if that's what you're asking.
Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 60 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]