Buffalo Forums

Products => Storage => Topic started by: gawo on September 07, 2021, 03:31:27 AM

Title: Problem after linkstation reboot
Post by: gawo on September 07, 2021, 03:31:27 AM
Hello

I have a problem with my LS420D (firmware version 1.87-0.02).

When the linkstation restarts, the network drives are not mapped. The error is "the specified network name is no longer available". SMB2 is activated in the link station (see pictures).

(https://share.drk-hattersheim.de/1.JPG)

(https://share.drk-hattersheim.de/2.JPG)

SMB1 is installed at the windows 10 workstation.


I have to disable SMB and activate SMB in die linkstation interface after one second, than it works!  But in the event of a power failure, this is not a permanent solution.

Does somebody has any idea?

Thanks!
Marius
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 45 (show)
Files included: 27 - 1055KB. (show)
Memory used: 737KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]