Print Page - RAID mount failure

Title: RAID mount failure
Post by: lincolnlim on January 05, 2010, 11:28:31 AM

Hi,

We brought a few Buffalo Terastation Pro NAS. They keep getting below RAID error.

RAID Error Notification

HDD error occured

Target array:RAID Array 1 (md2)

RAID array can not be mounted.

[TeraStationInformation]

TeraStationName: BUFFALO301 (TS-HTGL/R5)

Time: 2010/01/04 05:43:09

Setting Screen: http://192.168.30.200/

Here's the current firmware: TS-HTGL/R5 1.10 .

Is there a firmware that we can install to resolve this issue? If yes, where can I download the new firmware?

Or, how do we reset it to factory default and re-create the whole RAID again.

Thanks,

Title: Re: RAID mount failure
Post by: PCPiranha on January 07, 2010, 11:56:51 PM

It sounds like you might have a bad HDD. Are you getting any red lights next to any of the drives? You may just need to replace the drive and restructure the array

Buffalo Forums

Products => Storage => Topic started by: lincolnlim on January 05, 2010, 11:28:31 AM