Post by: xxsn0blindxx on December 02, 2009, 07:53:32 PM
I have a TS-1.0TGL/R5 that I am trying to setup with three 250GB drives. After installing the drive, the front panel lists
"HD[drive#] Error E16 HD[drive#] Not Found" for drives 1 through 3.
I have attempted to reflash the firmware using debug mode and the /force switch but I am running into problems.
So this is where I start in the flash utility.
I then open the debug window and select these options
The system reboots and I get this prompt and click yes
I then get this error message
What do I need ot do to get this back up and running?
Post by: PCPiranha on December 03, 2009, 02:48:31 AM
Try removing the drives individually and see if it boots up.
Post by: xxsn0blindxx on December 04, 2009, 07:34:17 AM
I tried that and nothing changed. Do the drives need to be configured before they cna be "found". The LCD panel shows that none ofthe drives are found.
Post by: PCPiranha on January 08, 2010, 02:38:18 AM
Did you have some sort of power failure? Also have you tried clicking "no" to the raid restructure?