Post by: finc on November 21, 2009, 07:38:47 AM
The login page 'Web Admin' at http://192.168.11.150/cgi-bin/top.cgi is not in english and whats worse I can not login admin | password.
How I reset it so all will be again english and can use standard login admin | password.
I need to set the station to 192.168.100.150 so I can use it in my home network, which has a modem which ip's I cannot change.
Did I reset the station to often?
Regards finc
Post by: finc on November 21, 2009, 08:13:56 AM
I reseted the station once more and could map it. The web admin is still in a non english version!
How to get it to english and the way I can login with admin | password
Post by: finc on November 21, 2009, 09:23:41 AM
And again after trying and trying, I got into the panel ( still in japanese language ).
I think I found the place where to change the language to english, but it set's it back to Japanese.
Post by: davo on November 21, 2009, 09:58:29 AM
Follow these instructions:
1. Connect to the web configuration utility by entering the LinkStation's IP address in a web browser.
2. In the column of blue items on the left handside, select the second link (the one below TOP).
3. Under the first header are two text fields (its for Name and description of the LinkStation); enter or modify the text in the second field.
4. Under the third header, the first entry is aradio selection with two options (you should be able to read NTP);select the one on the right.
5. Under the fourth header (with two menu boxes beneath it), set both menu boxes to the second entry in the list.
6. Click the Apply button and wait till the page has refreshed, after that select on the left hand side the "TOP" button.
Post by: finc on November 21, 2009, 10:30:13 AM
Thanks, I followed Your instructions.
Only on Step 5 I could not find any other choices at that point. But after I got it in english with Your help, I could change it afterwards.
Final Setup here: