Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: tiantian on September 27, 2009, 04:32:27 PM

Title: Firmware downlaoding hung!
Post by: tiantian on September 27, 2009, 04:32:27 PM
   

To Buffald Tech Support Team:

 

I failed to download my LS-CH500L firmware online. It always hang around 35MB downloading. Can you check your download files and have this problem fixed.

 

Thanks!

 

Tiantian

Title: Re: Firmware downlaoding hung!
Post by: JoshC on September 27, 2009, 11:55:11 PM
Are you downloading it wireless?  You shouldnt download it wireless it will corrupt it.   IF your downloading it hardwired then its a problem on your end.  Are files are fine.
Title: Re: Firmware downlaoding hung!
Post by: tiantian on September 28, 2009, 11:57:44 AM
   

Thanks. I can download it now.

 

The next question is can I skip fw1.07 and run fw1.21 directly?

 

Thanks!

Title: Re: Firmware downlaoding hung!
Post by: JoshC on September 28, 2009, 11:08:31 PM
Which firmware do you currently have?
Title: Re: Firmware downlaoding hung!
Post by: davo on September 29, 2009, 06:58:54 AM
   if you have anything lower than 1.07 already installed then you are using revision 1 of that unit. In which case 1.07 is the latest.
Title: Re: Firmware downlaoding hung!
Post by: tiantian on September 29, 2009, 09:04:06 PM
   

v1.01

 

I think I can't skip v1.07, right?

 

Thanks

Title: Re: Firmware downlaoding hung!
Post by: PCPiranha on September 29, 2009, 10:47:38 PM
No you have the version one, so you cannot use firmware 1.10 and above.
Title: Re: Firmware downlaoding hung!
Post by: tiantian on September 30, 2009, 12:13:52 PM
   You mean that I can only updagrade my firmware from v1.01 to v1.07 and can't upgrade to v1.21 from v1.07? Thanks!
Title: Re: Firmware downlaoding hung!
Post by: Memoryman on September 30, 2009, 12:28:03 PM
   

version 1 of that product currently stops at 1.07

version 2 uses different hardware and controller chip, requiring different Firmware code. It's Firmware revision begins at 1.10

Title: Re: Firmware downlaoding hung!
Post by: tiantian on September 30, 2009, 12:43:58 PM
   

Thanks, MemoryMan!

 

I am going to run fw1.07 now and forget about fw1.21.

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 94 (show)
Files included: 27 - 1055KB. (show)
Memory used: 719KB.
Tokens: post-login.
Queries used: 14.

[Show Queries]