Buffalo Forums

   hi,

at first sorry for my bad english. I used the searchfunction of this board and google. But it wasn't helpfully

We use in our network the Terastation TS-RHTGL49B. Now we bought the Linkstation LS-CHLF23. We want to use the Linkstation for the backup of the Terastation. But the backup doesn't work. I have set up the backup in the terastation which folder/share i want to backup to the linkstation.

These are my logs. There was nothing on the Linkstation. No files weren't backuped.

backuplog1_200909141700.txt
-------- BEGIN BACKUP 2009/09/14 17:00:01 array1/Scanserver -> LS-CHLF23@disk1/Backup --------
building file list ...
-------- END BACKUP 2009/09/14 17:18:51 array1/Scanserver -> LS-CHLF23@disk1/Backup --------

backuplog1_200909141800.txt
-------- BEGIN BACKUP 2009/09/14 18:00:02 array1/Scanserver -> LS-CHLF23@disk1/Backup --------
building file list ...
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(541) [receiver=3.0.3]
rsync: read error: Connection reset by peer (104)
rsync error: error in rsync protocol data stream (code 12) at io.c(614) [sender=2.6.8]
-------- END BACKUP 2009/09/14 18:14:22 array1/Scanserver -> LS-CHLF23@disk1/Backup --------

backuplog1_200909151336.txt
-------- BEGIN BACKUP 2009/09/15 13:36:57 array1/Scanserver -> LS-CHLF23@disk1/Backup --------
building file list ...
-------- END BACKUP 2009/09/15 13:57:00 array1/Scanserver -> LS-CHLF23@disk1/Backup --------

For the first and the second logs i used a fixed time and for the last one directly.


Maybe the terastation doesn't support the backup to the linkstation?

I also read that the linkstation is imaginary for home users.

I also don't find a configuration to integrate the linkstation i our active direcory.
Maybe it isn't build for it.

I need your help.