Buffalo Forums

Products => Storage => Topic started by: Clarenford on August 20, 2019, 10:48:54 AM

Title: LS-WX2.0TL/R1 - Function light flashes once and reboots
Post by: Clarenford on August 20, 2019, 10:48:54 AM
My unit just started doing this. Power on and sounds like it is booting(hear drives spinning) and then it stops, flashes a single red function light and reboots. It keeps doing that until turn off or unplugged.
Tried doing the hold function button for 10 seconds while turned off but, no change. I haven't found anything on the forums related to this issue.
Title: Re: LS-WX2.0TL/R1 - Function light flashes once and reboots
Post by: 1000001101000 on August 20, 2019, 11:36:33 AM
The manual lists the codes flashed by the led, it should give you some idea of what is going on.
Title: Re: LS-WX2.0TL/R1 - Function light flashes once and reboots
Post by: Clarenford on August 20, 2019, 01:22:53 PM
I didn't see any codes for the function light. It just gives me the one second red function led and reboots. No error/info codes.
Title: Re: LS-WX2.0TL/R1 - Function light flashes once and reboots
Post by: 1000001101000 on August 20, 2019, 02:08:43 PM
hmm, how long does it take for that to happen?

If it's only a second or two I would think the power supply isn't providing enough power for the device to start booting.

what happens if you try it without any drives in it?
Title: Re: LS-WX2.0TL/R1 - Function light flashes once and reboots
Post by: Clarenford on August 20, 2019, 02:34:08 PM
That was it. Pulled the drives and it stayed on. Tried a different power supply with drives in and it's still running with no errors.

Thank you!
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 65 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]