Buffalo Forums

Model LS-W1.0TGL/R1-V3.  Firmware v3.09.  Configured as RAID 1.  Network Type set to Active Directory.  When I attempt to assign a group or user to read/write, nothing happens.  I can assign to read.

When in Active Directory mode, the UI has an area for groups and another for users.  Each area has 3 boxes, 1 for groups/users added to read/write, 1 for groups/users added to read, 1 with the list of available groups/users.  The read/write and read boxes have 2 arrows, 1 pointing left to add, 1 pointing right to remove.

When attempting to add a group or user to read/write, I highlight the group/user that I want to add, then click the left-pointing arrow next to the read/write box.  Nothing happens, i.e. the group/user does not get added and the read/write box remains empty.  If I do this same thing for the read box, the group/user will be added, but of course, this is not the permission that I want.

Ngult,

Unfortunately this is a problem that we are still working on.  I have forwarded the information and we will do what we can.  The delagate authority method should provide a temporary fix.

http://forums.buffalotech.com/buffalo/board/message?board.id=0101&thread.id=10464

We apologize for the inconvenience.

I don't know if this problem has been fixed or not but I experienced the same thing; however, if you first add it to read only and then click the arrow to add it to read/write, it will put the group in there. Note, if you have a group in read/write, and then give -say Domain Users - read access, the read/write access will be nixed. It suck because I want to give domain users read to the share and read/write to a different group; however, it seems that since the users in the second group are also in Domain Users, the read only permissions trump the read/write.

What firmware are you using?