Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: commsguy on May 22, 2019, 11:18:17 PM

Title: TS-RX2.0TL/R5 rebuild with new disks
Post by: commsguy on May 22, 2019, 11:18:17 PM
I purchased a TeraStation III - TS-RX2.0TL/R5 without drives and have installed 4, 2TB drives.
I have tried multiple ways of loading the system from the firmware update.

Does anyone have a full install disk or rebuild disk or a method of loading it from scratch for this model?

Thanks
Title: Re: TS-RX2.0TL/R5 rebuild with new disks
Post by: 1000001101000 on May 23, 2019, 06:42:23 AM
The process is basically:
Get the device to boot into EM mode
Use tsupdater in debug mode to force the firmware installation.

For the terastation III, if you start with blank drives it should boot into EM mode from the on-board flash (after about 10 minutes). Then you should be able to force the repartition/reformat/reinstall with tsupdater:

https://buffalonas.miraheze.org/wiki/Enable_Debug_mode
Title: Re: TS-RX2.0TL/R5 rebuild with new disks
Post by: commsguy on August 06, 2019, 12:41:04 AM
That worked thank you.
Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 55 (show)
Files included: 27 - 1055KB. (show)
Memory used: 733KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]