Buffalo Forums

Products => Storage => Topic started by: saviopednekar on May 05, 2019, 09:09:46 AM

Title: Can't add second drive to LS-WXL!!!
Post by: saviopednekar on May 05, 2019, 09:09:46 AM
I managed to add a single 500GB Drive to an LS-WXL using TFTP Boot Recovery 1.53, got into EM mode, updated the Firmware using  LS Updater with modified LSUpdater.ini file and got the single disk running fine. Whenever I try to add a second 500GB disk, The unit fails to boot and gives me a red error light 1 sec plus 0.5 sec. Have tried several drives, no joy. Remove second disk, no problem booting. Anyone know a fix for this? BW, Jeff
Title: Re: Can't add second drive to LS-WXL!!!
Post by: 1000001101000 on May 05, 2019, 11:23:25 AM
Try switching which bay the drives are in. Most models only try to boot from the first drive they find.

Alternatively, boot from your good drive then add the second drive while the device is online. You should be able to initialize/format it at that point.

If all else fails you could reinstall the firmware with both drives installed
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]