Buffalo Forums

Hi all.

I had some problems with HDD and I tried to change it.
Now the NAS is started in EM mode.
I try to flash firmware using LS-Updater but nothing, a message said me the flash is failed.

Please help me.
C

Starting with a new disk it will need to be repartitioned and formatted, to do that you'll need to enable those steps in the lsupdater debug options:

https://buffalonas.miraheze.org/wiki/Enable_Debug_mode

Here LSUpdater

[Application]
Title = BUFFALO LinkStation Series Updater Ver.1.74
WaitReboot = 1200
WaitFormat = 600
WaitFileSend = 600
WaitDiscover = 120

[Target]
ProductID = 0x00000011
ProductID2 = 0x00000012
ProductID3 = 0x00000013
ProductID4 = 0x00000014
ProductID5 = 0x00003006
ProductID6 = 0x00003007
ProductID7 = 0x00000015
ProductID8 = 0x00000016
ProductID9 = 0x00003008
ProductID10 = 0x00004001
ProductID11 = 0x00000017
ProductID12 = 0x00000019
ProductID13 = 0x00000020
ProductID14 = 0x00003010
Name = LinkStation

[Flags]
VersionCheck = 0
NoFormatting = 0

[SpecialFlags]
Debug=1

Here attached what appear after lunch LSUpdater.exe.
No icon on the right-upper side.

(//)

I try also with

https://herzig-net.de/?page=unbrick_ls-wxl

I cannot find the debug menu. Where is it?

click the icon in the upper-left corner. a few menu options display one of them is the debug menu.