Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: Jolpool on July 12, 2009, 07:10:56 AM

Title: Linstation Live LS-CHL - not found
Post by: Jolpool on July 12, 2009, 07:10:56 AM
   

Hi,

 

I recently tried to update the firmware to version 1.06, to try and sort out some problems with the media server.  When i plug the drive in the power LED on the top just stays blue and the functin button will flash once.  I cannot find the drive under windows through the network or ip address i was using.

 

I have connected the drive directly to my computer and the network connection is ok, both light flash to show the connection, but i still can connect.  I am unable to update the firmware again as it is not found buy the update software.  Does anyone know what i need to do to sort this out?

 

Cheers,

 

john.

Title: Re: Linstation Live LS-CHL - not found
Post by: JoshC on July 12, 2009, 10:50:59 PM

If you have it plugged in directly then you will need to set a static on your LAN.  If Nas Navi is showing an IP address of something like 192.168.11.1 you will need to set your static to 192.168.11.2.

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]