Print Page - Need TFTP Boot Recovery for LS-XHL

Title: Need TFTP Boot Recovery for LS-XHL
Post by: Tranquang on July 07, 2009, 12:13:08 AM

Dear All

I replace HDD 1Tb of LS-XH1.0TL to 2.0TB but i can not get NAS go to EM mode, Pls tell me know how to get the TFTP Boot Recovery for LS-XHL.

Best regards

Tquang

Message Edited by Tranquang on 07-07-2009 12:17 AM

Message Edited by Tranquang on 07-07-2009 12:18 AM

Title: Re: Need TFTP Boot Recovery for LS-XHL
Post by: kevin on July 07, 2009, 12:20:59 AM

Buffalo does not support replacing the drive in this unit

Title: Re: Need TFTP Boot Recovery for LS-XHL
Post by: Tranquang on July 07, 2009, 04:15:25 AM

Can you tell me another way to fix it?

Title: Re: Need TFTP Boot Recovery for LS-XHL
Post by: kevin on July 07, 2009, 04:23:14 AM

Im not sure what was wrong with it to begin trouble shooting it

I do need to let you know that...

Buffalo does not support replacing the drives in this unit, in order to replace the drive in it you need to break it open therefore Voiding warranty!

Title: Re: Need TFTP Boot Recovery for LS-XHL
Post by: Tranquang on July 12, 2009, 10:56:26 AM

:smileyhappy: It's Ok - Thks!

Title: Re: Need TFTP Boot Recovery for LS-XHL
Post by: PCPiranha on July 13, 2009, 04:34:51 PM

Also you don't need to boot the unit into EM mode to perform the TFTP procedure. If the unit booted into em mode then the TFTP would serve no purpose as the unit has already booted up.

Buffalo Forums

Products => Storage => Topic started by: Tranquang on July 07, 2009, 12:13:08 AM