Print Page - no, srsly, LS-QVL finally resync'd, still can't create folders

Title: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 01, 2018, 11:40:38 PM

blue light. sync finished, still can't create folders. Whiskey Tango Foxtrot. Now what?

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 02, 2018, 12:40:18 AM

Bueller?

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: oxygen8 on April 02, 2018, 12:52:47 AM

you can create folders on good arrays
have you a good array?

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 02, 2018, 08:14:13 PM

yes, i still have the old drives, but that's really not the point of this exercise. I'm trying to upgrade the rig with new, larger drives.

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 02, 2018, 08:37:37 PM

NAS navigator says "Drive (RAID 5)" and a red bar that says "Unformatted".

I tried clicking "Format" for "Array 1" in the web interface, but that didn't do much, just left me back in the same state i started in.

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 02, 2018, 09:12:26 PM

nybody@livingroom:~/Downloads$ java -jar acp_commander.jar -t 192.168.0.107 -o
ACP_commander out of the nas-central.org (linkstationwiki.net) project.
Used to send ACP-commands to Buffalo linkstation(R) LS-PRO.

WARNING: This is experimental software that might brick your linkstation!

Using random connID value = 0E84912693DD
Using target:   serenitynas/192.168.0.107
Starting authentication procedure...
Sending Discover packet...
Found:   LS-QVLAC3 (/192.168.0.107)    LS-QVL(TEMMU) (ID=00641)    mac: 4C:E6:76:E7:1A:C3   Firmware= 1.740   Key=5E8675F9
Trying to authenticate EnOneCmd...   ACP_STATE_OK
start telnetd...
Reset root pwd...

You can now telnet to your box as user 'root' providing no / an empty password.
anybody@livingroom:~/Downloads$ telnet 192.168.0.107
Trying 192.168.0.107...
telnet: Unable to connect to remote host: Connection refused

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: oxygen8 on April 03, 2018, 01:58:15 AM

Do not use telnet on the ls-qvl
use ssh
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/ssh-freischalten-mit-2-klicks-t2468.html

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 03, 2018, 06:04:55 AM

i have also tried all of these. none of them worked.

java -jar acp_commander.jar -t 192.168.0.107 -c "(echo foo; echo foo) | passwd"
java -jar acp_commander.jar -t 192.168.0.107 -c "(echo foo5baR; echo foo5baR) | passwd"
java -jar acp_commander.jar -pw password -t 192.168.0.107 -c "(echo foo5baR; echo foo5baR) | passwd"
java -jar acp_commander.jar -ba -t 192.168.0.107 -c "(echo foo5baR; echo foo5baR) | passwd"
java -jar acp_commander.jar -na -t 192.168.0.107 -c "(echo foo5baR; echo foo5baR) | passwd"

in all cases, the password does not work

anybody@livingroom:~$ ssh root@192.168.0.107
Password:
Password:

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 03, 2018, 06:23:56 AM

ok, the gui worked!

NOW WHAT?

root@LS-QVLAC3:/# ps
PID Uid VSZ Stat Command
1 root 3140 S init
2 root SW [kthreadd]
3 root SW [ksoftirqd/0]
4 root SW [kworker/0:0]
5 root SW [kworker/u:0]
6 root SW< [khelper]
7 root SW [kworker/u:1]
98 root SW [sync_supers]
100 root SW [bdi-default]
102 root SW< [kblockd]
110 root SW< [md]
206 root SW [kswapd0]
255 root SW [fsnotify_mark]
273 root SW< [xfs_mru_cache]
274 root SW< [xfslogd]
275 root SW< [xfsdatad]
276 root SW< [xfsconvertd]
277 root SW< [crypto]
304 root SW [crypto]
305 root SW [crypto_ret]
491 root SW [scsi_eh_0]
492 root SW [scsi_eh_1]
535 root SW [mtdblock0]
550 root SW< [kcryptd]
750 root SW [md0_raid1]
777 root SW [md10_raid1]
784 root SW [md1_raid1]
860 root SW [flush-9:1]
864 root SW [kjournald]
905 root 1776 S < /sbin/udevd --daemon
2584 root SW [kjournald]
2639 root SW [khubd]
2715 root RW [kworker/0:2]
2717 root 1676 S /sbin/dhcpcd -L /etc/dhcpc -h LS-QVLAC3 -t 15 -x -y -z 140 eth0
2774 root 1912 S syslogd -m 0
2776 root 2780 S klogd
2785 root 3676 S /usr/sbin/inetd
2789 root 1880 S /usr/local/sbin/errormon
2794 root 2260 S /bin/sh /usr/local/sbin/kernelmon
2803 root 27564 S /usr/bin/python /usr/local/sbin/BuffaloXMLRPCServer.pyc --skip-auth
2855 root 3088 S /bin/sh /usr/local/sbin/miconmon_exec.sh start
3565 root 2096 S mdadm --monitor --scan --daemonise --pid-file /var/run/mdadm.pid --syslog --config /etc/md
3645 root 1860 S /usr/local/sbin/logchkd
3676 root 2908 S /bin/bash /usr/local/sbin/diskmon_exec.sh start
3689 root 5432 S /usr/sbin/lighttpd.webui -f /etc/lighttpd/buffalo-web.conf
3697 root 5168 S /usr/sbin/lighttpd.webui -f /etc/lighttpd/buffalo-web_https.conf
3745 root 2652 S /usr/local/sbin/clientUtil_server -i eth0
3757 root 1796 S /usr/local/sbin/mDNSResponderPosix -b -f /etc/bonjour.config
3760 root 5764 S /usr/local/sbin/lsprcvd -i eth0
3764 root 1852 S /usr/local/sbin/daemonwatch -a /etc/daemonwatch.list
3769 root 3416 S /usr/sbin/crond
3855 root 1756 S /usr/local/BootServer/tftpd
3856 root 18148 S /usr/local/BootServer/rarpd
3861 root 9948 S /usr/local/BootServer/rarpcfgd
3863 root 1624 S /usr/local/BootServer/fwupdated
4154 root 28856 S /usr/bin/speedy_backend -- -M1 -t3000 /www/buffalo/www/dynamic/dynamic.pl /www/buffalo/www
4508 root 3420 S /sbin/getty -L ttyS0 115200 vt100
4578 root 3284 S cat /proc/buffalo/kernevnt
4881 root 32912 S /usr/bin/speedy_backend -- -M1 -t3000 /www/buffalo/www/dynamic/dynamic.pl /www/buffalo/www
4980 root 2544 S lpd Waiting
4984 root 1632 S /usr/local/sbin/lprmd
5269 root 13640 S /usr/local/sbin/smbd -D
5271 root 7332 S /usr/local/sbin/nmbd -D
5280 root 13640 S /usr/local/sbin/smbd -D
10275 root 5204 S sshd
10707 root 7912 S sshd: root@pts/0
10728 root 2396 S -bash
16307 root SW [flush-9:0]
17028 root 13640 S /usr/local/sbin/smbd -D
17148 root 3284 S sleep 10
17167 root 3284 S sleep 3
17168 root 3420 R ps

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 03, 2018, 06:50:06 AM

-- Mount local disks --
mount: mounting /dev/md2 on /mnt/array1 failed: File too large
mount: mounting /dev/md2 on /mnt/array1 failed: File too large

Is this my problem?

I'm using four x 8TB drives

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 03, 2018, 07:48:59 AM

Yeah, I think it is a 16TB thing. Three 8TB drives in a RAID5 works fine.

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: oxygen8 on April 03, 2018, 08:52:00 AM

raid maximum is 16TB.
from
http://forum.buffalo.nas-central.org/viewtopic.php?f=75&t=44227&hilit=16TB

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 03, 2018, 10:04:10 AM

If I can get "inode64" into the mount options for XFS, would that help?

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: oxygen8 on April 03, 2018, 12:09:22 PM

Changing the CPU to intel atom would help.

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: awozniak on April 03, 2018, 01:32:33 PM

I can't tell if you're being sarcastic, or if you're actually serious.

Is this something that is actually possible?

I've dumped enough time money and effort into this project, I would not be opposed to dropping another $100 or so if there's a standard form factor board of some kind I could put in there and make work.

Title: Re: no, srsly, LS-QVL finally resync'd, still can't create folders
Post by: oxygen8 on April 03, 2018, 01:49:36 PM

You need a 64bit system to use more than 16TB.

Buffalo Forums

Products => Storage => Topic started by: awozniak on April 01, 2018, 11:40:38 PM