Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: rstarbuck on June 25, 2009, 10:59:42 PM

Title: LS Quad 4TB - Trying to update firmware via direct connection
Post by: rstarbuck on June 25, 2009, 10:59:42 PM
   

Hi,

I called into the tech support line and reported a constant flashing blue LED and no response from my LS-Quad. I was instructed to connect the unit directly to the PC and try to upgrade the firmware.

 

NasNavi now "sees" the drive, but  in "EM" mode and with a "?" over the icon. The firmware updater finds the drive, but when I click "update" it says that it "couldn't confirm a response" from the LS. I've tried again w/ no software firewalls active, but with the same results.

 

The blue LED is also now constant, BTW.

Title: Re: LS Quad 4TB - Trying to update firmware via direct connection
Post by: Dustrega on June 26, 2009, 04:36:33 AM
What firmware version is being shown? What's the IP of the NAS?
Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]