Print Page - 6 red lights on LS-CH500L

Title: 6 red lights on LS-CH500L
Post by: carlosraniery on June 25, 2009, 11:52:54 AM

Dears,

After an unsuccessful update firmware, I can't no more access my device. Even accessing the emergency mode is not possible. In this case, what can I do? I was thinking in mounting the HD in a linux machine and change the file initrd.img for the provided in the firmware zip file. What more else can I do? Thanks in advance...

Title: Re: 6 red lights on LS-CH500L
Post by: dgkelp on June 25, 2009, 02:06:34 PM

6 flashes means that it cannot mount the disk. I would go through the steps above in the force firmware procedure to attempt to resolve this issue.

http://forums.buffalotech.com/buffalo/board/message?board.id=0101&thread.id=9309

Follow the steps in the post and let us know what the results are.

Title: Re: 6 red lights on LS-CH500L
Post by: carlosraniery on June 25, 2009, 03:16:46 PM

YES!!!! It worked :-)

The only problem was the firmware that I got, it is in japanese :-(

Where can I find the firmware in english?

Title: Re: 6 red lights on LS-CH500L
Post by: PCPiranha on June 25, 2009, 03:35:08 PM

Try following these steps to change the device back to English:

1. Connect to the web configuration utility by entering the TeraStation's IP address in a web browser.
2. In the column of blue items on the left hand side, select the second link.
3. Under the first header are two text fields; enter or modify the text in the second.
4. Under the third header, the first entry is a radio selection with two options; select the one on the right.
5. Under the fourth header (with two menu/pulldown boxes beneath it),set both menu boxes to the second entry in the list (the second menubox should say cp437).
6. Click the button, and close and reopen the browser.

Message Edited by PCPiranha on 06-25-2009 03:36 PM

Buffalo Forums

Products => Storage => Topic started by: carlosraniery on June 25, 2009, 11:52:54 AM