Buffalo Forums

Products => Storage => Topic started by: shawn.wanamaker on October 12, 2017, 10:22:22 AM

Title: HA Solution for Terastation TS5400R running ISCSI
Post by: shawn.wanamaker on October 12, 2017, 10:22:22 AM
I currently have a 2008 R2 HyperV Cluster running over 2 hosts.  They are connected to a TS5400R using ISCSI for a common Target.  I have a second TS5400R with the exact same hardware configuration that I would like to setup for failover in case of hardware failure.  Everything I have read says out of the box this is not possible because of the ISCSI volume.  I am now looking outside the box to see if this is possible.  I have looked at upgrading the Host Servers to 2012 or above and changing how they connect using SMB 3.0 but that also does not seem to be a viable option for the Terastations.  If anybody can point me in the right direction I would be very appreciative.

Thank you
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 45 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]