Buffalo Forums

Products => Storage => Topic started by: mswann on February 14, 2017, 02:07:26 PM

Title: Cofigure a TS3400D0404 to boot automatically after a power failure?
Post by: mswann on February 14, 2017, 02:07:26 PM
I cant find anything in the GUI or documentation to get the NAS to do this. It hangs up the server launch if there is an extended power failure and the NAS is off. Can anyone help me? I travel a lot and cant push the start button remotely.

Its not even clear if a "smart" UPS will automatically initiate a boot command.
Title: Re: Cofigure a TS3400D0404 to boot automatically after a power failure?
Post by: Texturtle on February 16, 2017, 10:40:45 AM
This unit can sync to a UPS and boot up automatically when AC power is restored.
Title: Re: Cofigure a TS3400D0404 to boot automatically after a power failure?
Post by: mswann on February 16, 2017, 06:14:43 PM
Thanks for the response Texturtle. Is there a specification for a "smart" standard? A list of compatible UPS's?
Title: Re: Cofigure a TS3400D0404 to boot automatically after a power failure?
Post by: Texturtle on February 20, 2017, 03:15:31 PM
We typically recommend APC.
Title: Re: Cofigure a TS3400D0404 to boot automatically after a power failure?
Post by: mswann on March 01, 2017, 11:52:08 AM
Ok, I purchased a C1000 smart UPS. It only has a usb port for smart serial connection.

Does the Terastation require that UPS smart connection be though the serial port or can it connect through one of the USB ports?
Title: Re: Cofigure a TS3400D0404 to boot automatically after a power failure?
Post by: Texturtle on March 01, 2017, 12:43:51 PM
Connecting via USB should work fine.
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 70 (show)
Files included: 27 - 1055KB. (show)
Memory used: 733KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]