Buffalo Forums

Products => Storage => Topic started by: RMDS on February 07, 2017, 06:10:42 AM

Title: LS-WX2 - Cannot Mount Raid 1
Post by: RMDS on February 07, 2017, 06:10:42 AM
Hi

Could really do with some help as I'm getting communication error E14. Can't view any folders or back-up.

Any help would be greatly appreciated.

Ta
Title: Re: LS-WX2 - Cannot Mount Raid 1
Post by: davo on February 07, 2017, 06:38:28 AM
Moved to Storage Thread.

You probably had a disk failure in RAID0. If you log onto the admin page - System - Storage, what does it say. Do you have a backup?
Title: Re: LS-WX2 - Cannot Mount Raid 1
Post by: RMDS on February 09, 2017, 12:52:10 PM
The system was running on Raid 1 but checking now it say Array 1 is on Raid 0. I do not have a back up. Any idea how`I can retrieve the data?
Title: Re: LS-WX2 - Cannot Mount Raid 1
Post by: davo on February 09, 2017, 01:00:45 PM
It wouldnt change the RAID mode so it was always set to RAID0.

If you need the data then your best bet at this stage would be to contact a data recovery company.
Title: Re: LS-WX2 - Cannot Mount Raid 1
Post by: RMDS on February 09, 2017, 03:48:56 PM
I downloaded some software that examine the RAW data on a drive so using my Sata adaptor I managed to examine the drives. Both are identical and are divided into around 6 partitions. Despite what disk manager this has identified that the drives are full. Could this be the reason the Raid cannot be mounted and if I can manage to delete some of the information could this possibly cure the issue?
Title: Re: LS-WX2 - Cannot Mount Raid 1
Post by: isaacscloudCD on May 28, 2018, 12:24:58 PM
Was there any response to the last question on this post?
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 74 (show)
Files included: 27 - 1055KB. (show)
Memory used: 718KB.
Tokens: post-login.
Queries used: 14.

[Show Queries]