Print Page - LS210D0301 not responding

Title: LS210D0301 not responding
Post by: buffowner1972 on January 04, 2017, 10:24:28 AM

my trusty NAS stopped working about a month ago. Reset multiple times, no luck. I can ping it but not do anything else. NAS Navigator2 does not see it. I tried to reset to factory defaults but it isn't working. It just keeps blinking a white light.

Any suggestions?

Title: Re: LS210D0301 not responding
Post by: davo on January 04, 2017, 11:24:42 AM

Is the data needed? If not then remove the disk, format it and load the TFTP image again.

Title: Re: LS210D0301 not responding
Post by: buffowner1972 on January 04, 2017, 11:31:34 AM

i would really like to recover the data.

Title: Re: LS210D0301 not responding
Post by: buffowner1972 on January 06, 2017, 08:18:13 AM

Quote from: davo on January 04, 2017, 11:24:42 AM
Is the data needed? If not then remove the disk, format it and load the TFTP image again.

if i give up on recovering the data how would i do this

Title: Re: LS210D0301 not responding
Post by: buffowner1972 on January 06, 2017, 09:36:47 AM

(https://s24.postimg.org/5k4m6d18l/buff_diag.jpg)

i can ping the box.
it is listening on tcp ports 873 and 8873 (rsync?)
i can't see it in Navigator
it seems to be rejecting (like a firewall was running??) all my port scan attempts except for the 2 open ports.

Title: Re: LS210D0301 not responding
Post by: buffowner1972 on January 10, 2017, 09:15:22 AM

On to plan B.. i have a spare laptop and a hard drive adapter for USB. i've used it before, works nice. I want to try to recover some data then do a wipe i need to get to the drive inside the case, anyone point me to instructions on opening the plastic case without totally destroying it? i'd like to reassemble and use again.

Buffalo Forums

Products => Storage => Topic started by: buffowner1972 on January 04, 2017, 10:24:28 AM