Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: mphendry on July 19, 2016, 10:40:58 AM

Title: Restore firmware on LS-WXL
Post by: mphendry on July 19, 2016, 10:40:58 AM
I have a LS-WXL drive and recently had a problem with drive 2. Cutting a long story short, and not simply replacing drive 2, I am in a situation of the red flashing six times.

I believe I have tried to reinitialise and format the drives, but I now believe the erase function of NAS Navigator wipes my firmware too.

I have purchased a replacement drive, identical to the faulty original one. Both the drives have been 'CLEAN'ed using windows Diskpark so there should be no partitions whatsoever.

Any advise as to how I can connect to the drive and hopefully reinstall the system firmware?

Many thanks
Title: Re: Restore firmware on LS-WXL
Post by: davo on July 19, 2016, 10:52:02 AM
PM sent
Title: Re: Restore firmware on LS-WXL
Post by: mphendry on July 19, 2016, 11:17:41 AM
Thanks for your PM.

Do you think you will be able to assist? I already have the drive connected to my laptop via ethernet and have set my ip to 192.168.11.1. When I run TFTP (which shows listening on 192.168.11.1) it never progresses further than 'accepting requests..'

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 55 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]