Print Page - Installing DD-WRT on WZR-1750DHP

Title: Installing DD-WRT on WZR-1750DHP
Post by: alfmel on June 26, 2016, 08:07:29 PM

I just inherited a used WZR-1750DHP and I would like to install DD-WRT on it. The System Information page says the version number is 2.13. (I would assume that's the firmware version). I downloaded the Buffalo DD-WRT firmware image (wzr1750dhpd-v24sp2-23709c.zip) but when I upload the .bin file the router simply says "invalid firmware".

Any hints on how to install the DD-WRT image?

Title: Re: Installing DD-WRT on WZR-1750DHP
Post by: ahze on June 26, 2016, 09:51:09 PM

Yes go to http://dd-wrt.com/site/support/other-downloads?path=others%2Feko%2FBrainSlayer-V24-preSP2%2F2013%2F07-24-2013-r22118%2Fbuffalo_wzr-1750dhp%2F (http://dd-wrt.com/site/support/other-downloads?path=others%2Feko%2FBrainSlayer-V24-preSP2%2F2013%2F07-24-2013-r22118%2Fbuffalo_wzr-1750dhp%2F)

install the factory-to-dd-wrt.bin first then file buffalo-wzr-1750dhp-webflash.bin

or just read through http://www.dd-wrt.com/phpBB2/viewtopic.php?t=176310 (http://www.dd-wrt.com/phpBB2/viewtopic.php?t=176310) this is v25697 not the 23709 you were using but direction should work the same

Title: Re: Installing DD-WRT on WZR-1750DHP
Post by: alfmel on June 27, 2016, 08:14:45 AM

Thanks for the quick reply. Just a couple of follow-up questions.

1. I had read about BrainSlayer's builds before. Do I stick with the 7/24/2013 version you listed in your post or do I go with a newer version?

Also, if I'm installing the open source DD-WRT, what would be the advantages / disadavantages of moving to Buffalo's DD-WRT firmware?

Title: Re: Installing DD-WRT on WZR-1750DHP
Post by: alfmel on June 27, 2016, 01:35:15 PM

Update: I was able to install the stock DD-WRT image without any problems just by uploading it via the GUI. It is working well. I'll post more as I go along.

Buffalo Forums

Products => Wireless => Topic started by: alfmel on June 26, 2016, 08:07:29 PM