Buffalo Forums

Hi today i power up the LS-QV4, and it appears 7 times red light blinking, and i was searching and i don't know what it means, besause in one place it says it's the "new" e06, so what it means?
Help me please.

Its not reading the boot partition from any disk. Remove a disk at a time and see will it boot then.

Thanks for the reply.

i remove the disk 1, and at first it detects the detects de disck 2,3 and 4 with green lights, and a orange light appears with 1long, 2short times, and then a red light apepars with 1long,6short times, and the disck 1 light turn to red.

when i remove the disk 2, only the disk 1 green light appears, and again the 7 blinking red light.

When i remove the disk 3 only the disk 1 green light appears, and again the 7 blinking red light.

When i remove the disk 4 the same only the disk 1 green light appears, and again the 7 blinking red light.

What can i do next?

Looks like its an issue on disk1 so, can you see the NAS in the NAS Navigator with disk1 removed or access the admin page?

WOW thanks for the help, and yes i can access the NAS using the NAS Navigator, and i can access using web page admin page.

So it's seems that the disck 1 is dead?

Can i Change the disk with anoter with 2 or more terabytes?

Yes, and for goodness' sake check your backup!

If you don't have one then get one!