Buffalo Forums

Products => Storage => Topic started by: slovacek on February 17, 2016, 03:39:19 PM

Title: Linkstation LS-WS2.0TL/R1 - No Shutdown link or button
Post by: slovacek on February 17, 2016, 03:39:19 PM
I'm trying to find the proper way to shutdown my Linkstation. The manual says there should be a link if you right-click on the unit in NAS Navigator (there's not) and a link if you are in the web interface at the bottom of the left side (there's not).  I am getting a message that Drive 2 needs to be replaced immediately so I want to shut it down (properly) so I can take out the bad drive.  I don't want to brick the unit and lose data on the good drive.  What's the proper way to shut down in the absence of buttons/links that tell the unit to shut down?
Title: Re: Linkstation LS-WS2.0TL/R1 - No Shutdown link or button
Post by: davo on February 18, 2016, 02:42:40 AM
Just move the switch to OFF!
Title: Re: Linkstation LS-WS2.0TL/R1 - No Shutdown link or button
Post by: Eastmarch on February 23, 2016, 09:14:21 AM
Yeah, that switch actually sends a shutdown message, it doesn't just kill power. So it's a graceful shutdown.
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 59 (show)
Files included: 27 - 1055KB. (show)
Memory used: 719KB.
Tokens: post-login.
Queries used: 14.

[Show Queries]