Buffalo Forums

Hi Guys,

I upgrade the firmware on my TS-RHGL/R5 to 1.35 and found that on ftp it wants to use TLS. However my FTP software is unable to get a directory listing from the TeraStation. I can not see a way to turn the TLS off in the Terastation as that would be the simple fix. I can not see anything that I have to on the FileZilla FTP software. The certificate did come up from the Terastation and it has a life until 2027.

This is error given by the FileZilla when trying to connect.

Status:   Connecting to 10.0.100.10:21...
Status:   Connection established, waiting for welcome message...
Status:   Initializing TLS...
Status:   Verifying certificate...
Status:   TLS connection established.
Status:   Server does not support non-ASCII characters.
Status:   Connected
Status:   Retrieving directory listing...
Command:   PWD
Response:   257 "/" is current directory.
Command:   TYPE I
Response:   200 Type set to I
Command:   PASV
Response:   227 Entering Passive Mode (10,0,100,10,13,106).
Command:   LIST
Response:   150 Opening ASCII mode data connection for file list
Error:   GnuTLS error -110: The TLS connection was non-properly terminated.
Status:   Server did not properly shut down TLS connection
Error:   Transfer connection interrupted: ECONNABORTED - Connection aborted
Response:   226 Transfer complete.
Error:   Failed to retrieve directory listing

Any ideas how I can ftp please?

Fix it ....  :-[

It was the FTP software on an upgrade. 3.10 will use TLS on FTP as a default. the fix was

In the Site Manager entry for your server, set Encryption to 'Plain FTP'

:)