Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: enigma62 on May 20, 2009, 04:25:14 PM

Title: HD-CE1.OTU2-EU Firmware download problem
Post by: enigma62 on May 20, 2009, 04:25:14 PM
   

I recently bought 2 HD-CE1.OTU2-EU DriveStations and one is working OK, but the other isn't. It shows in my drive list as a 'Local Disk' but when I select it I get a 'Drive is not formatted' message. I've tried formatting it & it's then OK until I close down and then on re-start I get the format message again.

This happens whether both drives are plugged in or just the one.

 

I've read that there are problems with some drives when going into hibernation and that a firmware update is available. I've found the firmware on the Buffalo site, having selected my region as Europe, but when I try to download the update I enter my serial number but always get an Invalid Serial error.

 

Any suggestions would be most appreciated

 

Thanks.

Message Edited by enigma62 on 05-21-2009 09:09 PM
Message Edited by enigma62 on 05-21-2009 09:09 PM
Title: Re: HD-CE1.OTU2-EU Firmware download problem
Post by: kevin on May 22, 2009, 01:32:34 AM
If your unit is from Europe then it probably has a European serial number so you will have to download the FW from there site. Contact your local support for serial number issues.
Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 737KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]