Buffalo Forums

Products => Storage => Topic started by: jimzippy on December 11, 2014, 02:50:37 PM

Title: Please Help! LS-WXL 6 Red Flashes & NAS Not Discoverable
Post by: jimzippy on December 11, 2014, 02:50:37 PM
Hi,

I have had to replace both drives in my Buffalo Linkstation Duo LS-WXL. I installed the drives and it now has 6 Red Flashes and has disappeared from Nas Navigator. I read about running the firmware update, but this also can't discover the NAS on the network. I have also tried a X-Over cable and plugged it directly in to both Mac and PC and get the same result... Zip, nothing, zero...

There seems to be some indication about doing a TFTP boot, which i found and ran, but it didn't seem to do much and i had no instructions to follow.

I am two steps away from throwing it in the bin (or out of the window as stress relief) and never using buffalo again. I have Zyxel and Synology NAS's elsewhere and they have been a breeze by comparison.

Any help would be appreciated

Thanks
Title: Re: Please Help! LS-WXL 6 Red Flashes & NAS Not Discoverable
Post by: joma90 on January 06, 2015, 02:26:05 PM
So this nas does not have the OS in a ROM chip. There on the disk so that's why its not working. If you search for TFTP on the forums there is a set of instructions on what to do.

http://forums.buffalotech.com/index.php?topic=10185.45

here is the TFTP for your unit as well
http://www.mediafire.com/download/jvmmuor9oo1d1ne/TFTP_Boot_Recovery_LS-WXL_1.40.sfx.exe
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 735KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]