Buffalo Forums

Products => Storage => Topic started by: Monkae on December 04, 2014, 02:49:36 PM

Title: LS-X3.0TL Stuck With 2 & 5 Flashing.
Post by: Monkae on December 04, 2014, 02:49:36 PM
My nas put itself into EM mode yesterday and navi said to upgrade firmware, so I did. Everything ran smooth until nearing the end, as the drive stopped responding to the software. I then had a power cut :(. Whenever I boot up the drive now, it's just flashing lights like it's updating the firmware in a loop.

Any ideas before I crack it open to try and save my data?
Title: Re: LS-X3.0TL Stuck With 2 & 5 Flashing.
Post by: Monkae on December 04, 2014, 05:12:52 PM
I've now got it to boot into EM, but when trying to flash the firmware update it's saying "Partition not found. Aborting firmware update."

If I plonk the drive in my pc and use something like UFS, would I be able to recover data?
Title: Re: LS-X3.0TL Stuck With 2 & 5 Flashing.
Post by: davo on December 05, 2014, 01:47:24 PM
Quote from: Monkae on December 04, 2014, 05:12:52 PM
I've now got it to boot into EM, but when trying to flash the firmware update it's saying "Partition not found. Aborting firmware update."

If I plonk the drive in my pc and use something like UFS, would I be able to recover data?

Yes, there are five partitions, the data is on the largest.
Title: Re: LS-X3.0TL Stuck With 2 & 5 Flashing.
Post by: Monkae on December 05, 2014, 08:52:26 PM
There's nothing when I plug it into my computer. Drive isn't recognised at all, unfortunately.
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 60 (show)
Files included: 27 - 1055KB. (show)
Memory used: 733KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]