Buffalo Forums

Products => Storage => Topic started by: tkainz on July 01, 2014, 09:46:22 AM

Title: Cannot map drive to LinkStation when main PC is offline
Post by: tkainz on July 01, 2014, 09:46:22 AM
I have a LinkStation LS-WVL/E, firmware ver. 1.68.  Attached directly to the network switch, I can access and map drives from any other PC on the network as long as the main office PC is on.  I have the LinkStation on a fixed IP address of 10.0.0.50. The main PC - which is the one I used to initially set up the LinkStation - is also on a fixed IP address.  All other PC's on the network are dynamically allocated as needed.  What am I needing to do in order to be able to access the LinkStation from the other PC's without having to have the main PC on 7/24?  Thank You
Title: Re: Cannot map drive to LinkStation when main PC is offline
Post by: davo on July 01, 2014, 01:34:47 PM
Is the switch on the LS set to auto or manual? The main PC might be controlling the power via the NAS navigator?
Title: Re: Cannot map drive to LinkStation when main PC is offline
Post by: tkainz on July 02, 2014, 11:51:20 AM
See... I had to believe that it was something simple that I overlooked.  It seems to have solved the issue - I was able to access the mapped drive with the main PC (the one with NasNavigator2 installed)  completely shut down.  Perfect.. Thanks so much!

I'll note this in the other forum post I found with the same issue but no response. (appropriately attributing the solution to you of course.

Thanks Again
Title: Re: Cannot map drive to LinkStation when main PC is offline
Post by: davo on July 03, 2014, 04:48:55 AM
You're welcome :-)
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 64 (show)
Files included: 27 - 1055KB. (show)
Memory used: 719KB.
Tokens: post-login.
Queries used: 14.

[Show Queries]