Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: woodct on June 24, 2014, 02:38:23 PM

Title: LS-QL 8TB / LS-QV 4TB- Upgrade E06 / TFTP not found
Post by: woodct on June 24, 2014, 02:38:23 PM
I have first LS-Q2.0TL/R5 running (first gen. installed 8TB 4x2TB-- Seagate ST20000DM001-- )- I decide to upgrade.

Now, I just get LS-QV4.0TL/R5 to upgrade.  I remove 4x1TB from factory and installed 4x2TB-- Seagate ST20000DM001 instead.
I clean Harddisk and non partition harddisk.

LS-QV4.0TL/R5 --  cannot be found on the computer.  I do "EM mode" and try to do "TFTP - TFTP Boot Recovery LS-QTL 1.04"  192.168.11.1 on my laptop. - without firewall and anti-virus. 
System is in E06 mode.


Any suggestion to upgrade the harddisk? on LS-QV4.0TL/R5 and update firmware?

Can I create the Raid5 with factory 1T harddisk and replace old 2T harddisk, one by one?


Thanks in advance.




Title: Re: LS-QL 8TB / LS-QV 4TB- Upgrade E06 / TFTP not found
Post by: davo on June 24, 2014, 04:48:31 PM
You're using the wrong TFTP image for the LS-QVL anyways. You cannot use an image for the LS-QL on the LS-QVL.
Title: Re: LS-QL 8TB / LS-QV 4TB- Upgrade E06 / TFTP not found
Post by: woodct on June 24, 2014, 10:22:40 PM
davo
which TFTP that I should use.  Please advise me.  Thanks.

I am using TFTP KirkwoodVariants version

My notebook is getting signal from the LinkStation LS-QVL.  but TFTP Boot / Firmware update cannot find it.



Title: Re: LS-QL 8TB / LS-QV 4TB- Upgrade E06 / TFTP not found
Post by: woodct on June 27, 2014, 02:05:05 PM
Update.

Solution:  I delete raid on the Array1 , replace drive by drive.

Finally.  success.
Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 60 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]