Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: Antonio on April 18, 2009, 03:33:47 PM

Title: LS-CHL won't wake up!!
Post by: Antonio on April 18, 2009, 03:33:47 PM
   hi Just bought a LS CHL. Firmware 1.07. When the unit is set to Auto it shuts down when I switch off the PC which has NAS installed. When I then restart the PC, the unit doesn't power up and as a result is inaccessible. It doesn't show up is NAS, etc. If I switch the unit off and then restart it, the PC then recognises it. Any idea what I can do other than setting the power switch to permanently on? Many thanks. A
Title: Re: LS-CHL won't wake up!!
Post by: PCPiranha on April 18, 2009, 04:15:52 PM
Try force updating the latest firmware and check the option to rebuild partition table (WARNING: this will result in data loss).
Title: Re: LS-CHL won't wake up!!
Post by: Antonio on April 18, 2009, 05:11:38 PM
   

Thanks for your reply. How do I do what you've suggested? I installed the latest firmware yesterday, I don't remember seeing anything about rebuilding partitions etc. The whole update seemed automatic with very little intervention required.

Title: Re: LS-CHL won't wake up!!
Post by: PCPiranha on April 18, 2009, 05:30:07 PM
To see the force update proceedure use this link: http://forums.buffalotech.com/buffalo/board/message?board.id=0101&message.id=277&query.id=52541#M277
Message Edited by PCPiranha on 04-18-2009 05:31 PM
Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 60 (show)
Files included: 27 - 1055KB. (show)
Memory used: 733KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]