Buffalo Forums

Products => Storage => Topic started by: akoop on April 17, 2009, 12:34:11 PM

Title: TeraStation Pro II and APC UPS config
Post by: akoop on April 17, 2009, 12:34:11 PM
   I am trying to get our Terastation Pro II to shutdown when the UPS tells it there is a power failure and then restart when AC power is restored.  I am using an APC Smart UPS 1500 (SUA1500) with the black APC serial sensing cable.  I have been able to get the unit to shutdown when it senses the AC power loss (front panel displays E10 message, but I have not been able to get the unit to restart after AC power is restored. 

 

In the UPS setup screen I have the following option set:

Synchronize with UPS: enabled

UPS Connection Type: APC Style
Shutdown Condition when Power Failure: Shutdown Terastation after 30 seconds
UPS Behavior After TeraStation has Shutdown: (I have tried both options, if I select Alive then the next selection becomes unavailable).
UPS Recovery Function: Enabled

 

Anyone have any ideas?

Message Edited by akoop on 04-17-2009 12:39 PM
Message Edited by akoop on 04-17-2009 12:39 PM
Title: Re: TeraStation Pro II and APC UPS config
Post by: Colin137 on April 18, 2009, 12:37:00 PM
Do you have the latest firmware version (1.33)?
Title: Re: TeraStation Pro II and APC UPS config
Post by: akoop on April 20, 2009, 06:38:45 AM
   Yes, the device is at firmware version 1.33.
Title: Re: TeraStation Pro II and APC UPS config
Post by: akoop on April 24, 2009, 01:34:10 PM
   Does anyone have the list of supportted APC UPS units for a TeraStation Pro II? 
Title: Re: TeraStation Pro II and APC UPS config
Post by: Dustrega on April 24, 2009, 03:59:03 PM
Please review this post
Title: Re: TeraStation Pro II and APC UPS config
Post by: akoop on April 27, 2009, 08:43:17 AM
   Buffalo Tech Support has confirmed that there is a design flaw and the units will NOT power back on.  The power switch has a flaw that will not allow it.
Message Edited by akoop on 04-27-2009 08:44 AM
Title: Re: TeraStation Pro II and APC UPS config
Post by: szimbler on January 18, 2010, 05:34:05 AM
   

can you repost this link as it is now dead and would be usful to help me configure my quad

Title: TeraStation TS-XEL3AC and APC UPS config
Post by: cjnovak on June 24, 2010, 10:04:56 AM

I too would like to know how to configure my Terastation TS-XEL3AC (firmware 1.30) for auto-recovery following a power failure.  The link posted above does NOT work.

Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 80 (show)
Files included: 27 - 1055KB. (show)
Memory used: 735KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]