Buffalo Forums

Hi there,

my Terastation Duo restarts in irregular intervals. I am notified per mail so I got a bit irritated by those messages. Does somebody see a problem in the following log extract?

Sep  1 16:00:07 TS-WXL88A linkstation: log saved to NAND(cron)
Sep  1 17:34:02 TS-WXL88A S40B_update_notifications.sh: deleting old settings...
Sep  1 17:34:02 TS-WXL88A last message repeated 2 times
Sep  1 17:34:02 TS-WXL88A S40B_update_notifications.sh: checking and registering to cron...
Sep  1 17:34:02 TS-WXL88A S40B_update_notifications.sh: old xml file found. deleting...
Sep  1 17:34:04 TS-WXL88A S40B_update_notifications.sh: starting f/w cheking process ...
Sep  1 17:34:05 TS-WXL88A S40B_update_notifications.sh: step1 result=0
Sep  1 17:34:05 TS-WXL88A S40B_update_notifications.sh: version_is_latest
Sep  1 17:34:05 TS-WXL88A S40B_update_notifications.sh: deleting from lcd...
Sep  1 21:08:26 TS-WXL88A errormon[1535]: exit.: sig=15
Sep  1 21:08:30 TS-WXL88A dhcpcd[1436]: terminating on signal 15
Sep  1 21:08:30 TS-WXL88A dhcpcd[1436]: ** DontDownIface=1
Sep  1 21:08:30 TS-WXL88A dhcpcd.exe: interface link is down.
Sep  1 21:08:34 TS-WXL88A linkstation: cron.sh : logrotate.status is fine.
Sep  1 21:34:17 TS-WXL88A u-boot: BUFFALO U-BOOT Start !!!

Or the following?

Sep  1 13:04:04 TS-WXL88A linkstation: [Success] Sync to ntp server
Sep  1 14:07:02 TS-WXL88A S40B_update_notifications.sh: deleting old settings...
Sep  1 14:07:02 TS-WXL88A last message repeated 2 times
Sep  1 14:07:02 TS-WXL88A S40B_update_notifications.sh: checking and registering to cron...
Sep  1 14:07:03 TS-WXL88A S40B_update_notifications.sh: old xml file found. deleting...
Sep  1 14:07:04 TS-WXL88A S40B_update_notifications.sh: starting f/w cheking process ...
Sep  1 14:07:06 TS-WXL88A S40B_update_notifications.sh: step1 result=0
Sep  1 14:07:06 TS-WXL88A S40B_update_notifications.sh: version_is_latest
Sep  1 14:07:06 TS-WXL88A S40B_update_notifications.sh: deleting from lcd...
Sep  1 14:44:36 TS-WXL88A errormon[1535]: exit.: sig=15
Sep  1 14:44:39 TS-WXL88A dhcpcd[1430]: terminating on signal 15
Sep  1 14:44:39 TS-WXL88A dhcpcd[1430]: ** DontDownIface=1
Sep  1 14:44:39 TS-WXL88A dhcpcd[1436]: terminating on signal 15
Sep  1 14:44:39 TS-WXL88A dhcpcd[1436]: ** DontDownIface=1
Sep  1 14:44:39 TS-WXL88A dhcpcd.exe: wrong interface name(maybe autoip interface) ""
Sep  1 14:44:40 TS-WXL88A dhcpcd.exe: interface link is down.
Sep  1 14:44:43 TS-WXL88A linkstation: cron.sh : logrotate.status is fine.
Sep  1 15:11:00 TS-WXL88A u-boot: BUFFALO U-BOOT Start !!! 
Sep  1 15:11:00 TS-WXL88A u-boot:  ** LOADER **
Sep  1 15:11:00 TS-WXL88A u-boot:  ** BUFFALO BOARD: DB-MV78100-A-BP LE (CFG_ENV_ADDR=fff80000)
Sep  1 15:11:00 TS-WXL88A u-boot: U-Boot 1.1.4 (Jun  7 2012 - 21:18:04) Marvell version: 3.3.5
Sep  1 15:11:00 TS-WXL88A u-boot: Buffalo Version: 2.10-1.01
Sep  1 15:11:00 TS-WXL88A u-boot: U-Boot code: 00600000 -> 0066FFF0  BSS: -> 00684D30

The Terastation Duo is quite new, including a new firmware upgrade. As you can see above it is version 2.10-1.01.

I would be thankful for any insight!

Best
Niklas

what is the switch on the back set to? Manual or auto?

Hard to tell. I am a few hundred kilometers away from the station. Or is there a way to tell from the web access?

Quote from: metaswirl on September 03, 2013, 04:58:35 PM
Hard to tell. I am a few hundred kilometers away from the station. Or is there a way to tell from the web access?

Nope!

Can you tell me what difference it makes? Maybe I can ask somebody to check it or at least I know what I am dealing with :)

Checked the manual. I see where you're heading. Seems my problem is a feature. Thx for the hint!

I assume the problem is solved.