Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: honkitonkman on August 11, 2013, 02:54:19 AM

Title: LS-W2.0TGL - Completely new setup
Post by: honkitonkman on August 11, 2013, 02:54:19 AM
Hi,

earlier I disassembled my Linkstation  LS-W2.0TGL and formatted (!) the two drives as I wanted to put them into another NAS. And yes, I should not have done it in the first place... 

However, now I reassembled the unit and need to reconfigure/install it back to factory settings (I am assuming I need to install the proprietary Operating System, etc. but have no idea what to do and where to start). I was hoping there is some kind of a Wiki/HowTo or setup program or a file collection which I just swiftly need to push on the NAS and it will come back to life :-) - and yes I did not lose my hope... Any help appreciated.
Thanks
Title: Re: LS-W2.0TGL - Completely new setup
Post by: honkitonkman on August 11, 2013, 09:36:20 AM
Hi, here is an update. I found this site and am working on the new setup
http://buffalo.nas-central.org/wiki/Category:LS-WTGL/R1/Restoring_from_empty_disks
Title: Re: LS-W2.0TGL - Completely new setup
Post by: davo on August 12, 2013, 10:38:11 AM
Follow FAQ 3 of 5 in the storage section to TFTP the unit, this will put it into EM mode and then just reinstall the firmware.
Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 59 (show)
Files included: 27 - 1055KB. (show)
Memory used: 719KB.
Tokens: post-login.
Queries used: 14.

[Show Queries]