Buffalo Forums

Products => Storage => Topic started by: PennieD on February 22, 2009, 02:34:25 PM

Title: HSDH500GL Firmware version 2.10 with Netgear Router wgr614 v6
Post by: PennieD on February 22, 2009, 02:34:25 PM
   

Hi

 

I have tried unsuccessfully to activate the Web Access through the BuffaloNAS.com website.

 

I've configured the Linkstation and my router per the instructions--but I keep getting errors about the device name and password--"must be 20 characters or less, hypens, dashes...etc".

 

My device name and passwords meet the criteria specified.

 

I have tried both the UPnP and manually port forwarding ( port 9000) on the rounter--each trail produces the same results.

 

Any advice?--Is it really this difficult?

 

Thanks

 

 

 

 


Title: Re: HSDH500GL Firmware version 2.10 with Netgear Router wgr614 v6
Post by: Dustrega on February 23, 2009, 05:17:32 PM

PennieD,

 

   Is this in the Web Access setup that you're getting an error from the NAS?  You are picking a unique BuffaloNAS.com name correct?  Post what information is being entered and we'll help you as best we can.

Message Edited by Dustrega on 02-23-2009 05:18 PM
Title: Re: HSDH500GL Firmware version 2.10 with Netgear Router wgr614 v6
Post by: pagesk on February 23, 2009, 11:04:40 PM
   

this is the same problem I have.

 

I tried to upgrade the firmware to 2.11 I get "ACP_STATE_FAILURE"  updating is aborted.

Title: Re: HSDH500GL Firmware version 2.10 with Netgear Router wgr614 v6
Post by: Colin137 on February 27, 2009, 05:14:24 PM
PennieD, i've seen this issue after updating the firmware. Try resetting the device to factory defaults from Maintenance->Initialization, Restore.
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 64 (show)
Files included: 27 - 1055KB. (show)
Memory used: 719KB.
Tokens: post-login.
Queries used: 14.

[Show Queries]