Print Page - Solid blue/flashing orange LED on Linkstation Quad 4TB, bricked?

Title: Solid blue/flashing orange LED on Linkstation Quad 4TB, bricked?
Post by: jpizzimenti on February 19, 2009, 08:44:58 PM

When I started it up & ran the setup utility, it got to setting up the IP address (Linksys WRT310N router) & said it failed. When I go into the router settings, it looks like the IP is good, but it won't come up when I try to map the drive. OS of the local PC is Vista SP1, installed the patch.

When I enter the IP address, the only option that is selectable is Disk Copy & it says that a disk utility is running & other options are unavailable until it is complete. Drive LED's are solid green. Been like this for an hour, wait it out?

Title: Re: Solid blue/flashing orange LED on Linkstation Quad 4TB, bricked?
Post by: jpizzimenti on February 19, 2009, 08:47:54 PM

The LED seems to flash 3 times, for what it's worth, then it repeats.

Title: Re: Solid blue/flashing orange LED on Linkstation Quad 4TB, bricked?
Post by: Jason on February 20, 2009, 07:24:25 AM

Is it still doing this? It sounds like it's in disk check. This process can take quite a few hours.

Title: Re: Solid blue/flashing orange LED on Linkstation Quad 4TB, bricked?
Post by: jpizzimenti on February 20, 2009, 08:23:22 AM

I let it run overnight, it's still solid blue with 3 flashing orange on a repeat cycle. Drive LED's are solid green. Can't log into the device via IP address, Setup program won't see the device, but router is still showing the IP address.

Pressing the power button does nothing.

Buffalo Forums

Products => Storage => Topic started by: jpizzimenti on February 19, 2009, 08:44:58 PM