Print Page - WZR2-G300N port problem

Title: WZR2-G300N port problem
Post by: speedfire on December 03, 2008, 05:33:43 AM

Hi! i have problem with wzr2-g300n router, i have the latest firmware. Now i have problem with port-s opening, i want open 27015 port, but not working.

Title: Re: WZR2-G300N port problem
Post by: Paul on December 05, 2008, 06:28:01 PM

what is the error you are getting?

Title: Re: WZR2-G300N port problem
Post by: speedfire on December 06, 2008, 08:51:01 AM

im getting no error-s, in Lan Config i want to open 27015 udp but not working. In DMZ mod i write my lan ip there and ti should open all ports, am i right? But dmz not working too:S

In old firmware, port opening was simple, but this new one (1.52) its a problem.

Message Edited by speedfire on 12-06-2008 08:54 AM

Title: Re: WZR2-G300N port problem
Post by: Paul on December 06, 2008, 09:24:30 AM

try defaulting the router, this will help with a fresh start on the new firmware. If that does not work then roll back to the first firmware.

Title: Re: WZR2-G300N port problem
Post by: speedfire on December 06, 2008, 10:40:16 AM

i have defaulting it, but nothing. How to rollback the firmware?

Title: Re: WZR2-G300N port problem
Post by: Paul on December 06, 2008, 11:07:48 AM

Can you down load the older version? If not you may need to contact support for your region and have them provide it for you.

Title: Re: WZR2-G300N port problem
Post by: speedfire on December 06, 2008, 12:53:20 PM

**bleep** i dont remember the older version :S

Title: Re: WZR2-G300N port problem
Post by: speedfire on December 07, 2008, 04:31:36 AM

I Think the older firware version was 1.00_1.26

Title: Re: WZR2-G300N port problem
Post by: marvin on December 08, 2008, 11:23:54 AM

What region are you in? That will play a factory on what the older version you had was. If you contact your local support they can most likely provide it for you.

Buffalo Forums

Products => Wireless => Topic started by: speedfire on December 03, 2008, 05:33:43 AM