Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: Flex on June 05, 2013, 07:41:37 PM

Title: LS-V2.0TL with error E22 after reboot, Web Interface still works
Post by: Flex on June 05, 2013, 07:41:37 PM

Hi All,

 

I'm having a issue with my LS-V2.0TL NAS.  Today the power went off and when it came back on the NAS status light was flashing error code 12 (in red).  The manual doesn't mention anything about error code 12.  I could still log into the web interface and access my files.  I tried a system reset via the web interface to see if it would fix the problem.  However after the reset the unit flashed error code 22 and now I can't access my shared folders.  The web interface still works, however it states the drive it's mounted.  I tried a hard reset, still the same.

 

Any ideas?

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 45 (show)
Files included: 27 - 1055KB. (show)
Memory used: 737KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]