Print Page - NAS Navigator 2 can not find network drive on Time Warner Cable Home network

Title: NAS Navigator 2 can not find network drive on Time Warner Cable Home network
Post by: Phr on April 05, 2013, 10:25:02 AM

I had no issues with my LinkSys Pro LS-V3.0TL connected through my LinkSys EA4500 home network and router. Now that I have moved and have replaced my LinkSys EA4500 with the ARRIS DG860 home network and cable modem supplied by Time Warner Cable the NAS Navigator 2 can not find the LinkSys Pro LS-V3.0TL.

My home computer is a dell GX270 running Windows XP Pro

I have uninstall all the software that came with the inkSys Pro LS-V3.0TL

Re-boot my PC many times

Re-boot the LinkSys Pro LS-V3.0TL many time.

Re-booted the ARRIS DG860 many times

I just keep getting the inkSys Pro LS-V3.0TL icon with a yellow bubble with a question mark inside.

Title: Re: NAS Navigator 2 can not find network drive on Time Warner Cable Home network
Post by: davo on April 05, 2013, 10:32:12 AM

Any if you click the yellow bubble what does it say? What is the IP address of your Linkstation and router?

Title: Re: NAS Navigator 2 can not find network drive on Time Warner Cable Home network
Post by: Phr on April 05, 2013, 12:34:22 PM

I am on version 2.32 of NAS Navigator 2

Hostname:LS-VL-EMA59
IP Address:192.168.0.3
Product Name:LS-VL-Series
information
The EM mode was detected. Update firmware or contact you local technical support.

Title: Re: NAS Navigator 2 can not find network drive on Time Warner Cable Home network
Post by: Phr on April 05, 2013, 12:37:31 PM

I also get a slide up message on the bottom right of my screen that says the following...

A notification has been sent by LS-VL-EMA59
Confirm NASNavigator2 main window.

Title: Re: NAS Navigator 2 can not find network drive on Time Warner Cable Home network
Post by: davo on April 05, 2013, 01:21:45 PM

Reinstall the firmware.

Buffalo Forums

Products => Storage => Topic started by: Phr on April 05, 2013, 10:25:02 AM