My problems seem to go from one thing to another.
I checked both disks they they are fine as 2 brand new disk should be. I removed the partitions from both disks as suggested.
When i start my unit i get 6 red flashes. If i press the function button, it stops flashing red and the power light just continuously flashes blue.
I have tried the TFTP boot, i can get it to connect and send blocks. However once that is done i can't perform firmware update.
I'm getting sick of this unit and it will be going back to the shop it came from if things don't improove.
/
Any suggestions that relate to a LS-WVL, every other model seems to be covered on this forum except this one