Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: oxygen8 on April 04, 2013, 07:50:48 AM

Title: E22 after Seagate Barracude-All-GRCC4H on LS-WVL
Post by: oxygen8 on April 04, 2013, 07:50:48 AM

I flash my two Seagate
Device Model:     ST3000DM001-9YN166
Firmware Version: CC4B
to

Firmware Version: CC4H

now on reboot my LS-WVL shows E22

 

i flash the  Linkstation firmware 1.54 again. No luck.

 

I do not use Raid.

With SSH i can mount /dev/md21 /mnt/disk2 an all looks fine.

/dev/md22 will mount on /mnt/disk1 automatically

 

After Reboot i get E22 again.

 


Seagate writes the MBR while flashing the Firmware.

With Data on it i can not use rebuild partition table to write a new MBR.

 

No Luck with

dd if=/dev/sda of=/dev/sdb bs=512 count=1

 

No Luck with Check Disk from Webif

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 45 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]