Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: Gdraper on April 01, 2013, 04:01:16 PM

Title: LS-QV4.0TL - An error in an Raid array has Been detected
Post by: Gdraper on April 01, 2013, 04:01:16 PM

I have a Buffalo LinkStation Pro Quad LS-QV4.0TL/R5 4TB Network Attached Storage. it is configured as RAID 10 and recently it has had an error with disk #1 and has had to reconfigure the disk and array.  I am on firmware 1.11 but I would like some support on what I should do next.  The problem has occurred 2 time now with the same disk1 issue.  Should I be looking to change the disk in drive 1? should I update the firmware?  Help? (This is the 2nd time that it's happened within 2 months)

 

https://www.dropbox.com/s/amm4q0pjx72f5zw/Rad10-issues.JPG

 

Title: Re: LS-QV4.0TL - An error in an Raid array has Been detected
Post by: davo on April 01, 2013, 05:52:11 PM
1. Update to the latest firmware (1.64)
2. Rebuild the RAID again.
Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 50 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]