Print Page - Problem with LS-CH 2.0 TL

Title: Problem with LS-CH 2.0 TL
Post by: wendersonleal on January 29, 2013, 07:02:52 PM

My NAS blink the Led blink red 6 times.

Do you know what's happen ?

Help !

Title: Re: Problem with LS-CH 2.0 TL
Post by: davo on January 30, 2013, 02:53:07 AM

Follow FAQ 3 of 5 in the storage section to TFTP your unit, one of the partitions has become corrupt. Refer to your backup as the process to get the unit into an operational state again will erase your data.

Title: Re: Problem with LS-CH 2.0 TL
Post by: wendersonleal on January 30, 2013, 04:12:52 AM

I took my HD and format in a external Hd case with Linux like NTFS.

The Led continue blinkink 6 times red.

I have tried to use 2 others 500 Gb HD and i see the same.

Title: Re: Problem with LS-CH 2.0 TL
Post by: davo on January 30, 2013, 04:26:37 AM

And?! that is to be expected if you format the HDD! Follow FAQ 3 of 5.

Title: Re: Problem with LS-CH 2.0 TL
Post by: wendersonleal on January 30, 2013, 04:53:30 AM

Davo,

I am sorry. I am not a expert user. This is my first NAS.

I didn't find a FAQ session in the pdf manual.

Please, help me. Could you send me a link ?

Title: Re: Problem with LS-CH 2.0 TL
Post by: davo on January 30, 2013, 05:12:45 AM

http://forums.buffalotech.com/t5/Storage/FAQ-3-of-5-TFTP-boot-procedure/td-p/100319

Title: Re: Problem with LS-CH 2.0 TL
Post by: wendersonleal on January 30, 2013, 05:47:14 AM

Hey guy,thanks a lot !

Now i am at work, but i will try when arrive at home.

Thanks a lot for your help !

Buffalo Forums

Products => Storage => Topic started by: wendersonleal on January 29, 2013, 07:02:52 PM