I purchased a LS-Q4.0TL/R5 online.
I am trying to install the software using the setup utility for Link Navigator 1.30.
After the setup software discovers the unit on the network, I get "setup has failed because administrator password has changed." I have tried to start it up in EM mode but there are a couple of different proceedures floating around the forums. I have tried a couple variations but none of them work for me. Any help would be appriciated.
Thanks,
String
reset it using the function button.
I have tried that a couple times. It didn't work.
Here is what I tried. Let me know if any of these are correct
Option 1:
Power off unit
hold function button for 10 seconds
power on
continue holding 10 seconds
release all
option 2:
power off unit
hold function button for 6 seconds
power on
let go of function button
when function light burns steady, press function button for 1 second and release
option 3:
power off unit
power on while pressing and holding the function button for 6 seconds
release funtion button for 6 seconds
hold function button 6 seconds
String