Print Page - Documents for Linkstation LS-CH 1.0TL-AP, setup and Mac connection ?

Title: Documents for Linkstation LS-CH 1.0TL-AP, setup and Mac connection ?
Post by: tianqi on January 22, 2013, 04:30:28 AM

Hi,

I have an old Linkstation, LS-CH 1.0TL-AP, have not used for a long while, now trying to use it as a NAS and connected to my Mac. I tried to search Buffalo site, could not find any documents. Can any one help? The unit is an old model.

Thanks

Tian

Title: Re: Documents for Linkstation LS-CH 1.0TL-AP, setup and Mac connection ?
Post by: davo on January 22, 2013, 04:32:43 AM

what firmware version are you using and what MAC OS?

You can get the firmware from the Nas Navigator: http://www.buffalo-technology.com/en/download_file.php?r=8109

Title: Re: Documents for Linkstation LS-CH 1.0TL-AP, setup and Mac connection ?
Post by: tianqi on January 23, 2013, 06:19:42 AM

Thanks, I have download from your url, will try to run it.

Not sure what is my firmware version, wonder how I can find out? MAC OS is 10.8

Title: Re: Documents for Linkstation LS-CH 1.0TL-AP, setup and Mac connection ?
Post by: davo on January 23, 2013, 06:31:30 AM

read my last post on how to get the firmware! It will tell you in the nas navigator.

Title: Re: Documents for Linkstation LS-CH 1.0TL-AP, setup and Mac connection ?
Post by: tianqi on January 23, 2013, 06:44:19 AM

I have run the Nasnavigator, found my firmware is 1.10, Nasnavigator shows HDD is 30% used, butwhen I tried to refresh or open it, got error message, saying that

IP address had some problem, when the system tried to fix the IP address, failed.

Any sugestions ?

Thanks

Title: Re: Documents for Linkstation LS-CH 1.0TL-AP, setup and Mac connection ?
Post by: davo on January 23, 2013, 07:00:17 AM

what is the IP address of both the Linkstation and MAC? Is it connected into the MAC directly or via the router?

Buffalo Forums

Products => Storage => Topic started by: tianqi on January 22, 2013, 04:30:28 AM