Text only | Text with Images

Buffalo Forums

Products => Storage => Topic started by: dw61204 on January 18, 2013, 09:52:44 PM

Title: LS-WX2.0TL/R1 flashing red light, one long three short after HDD failure
Post by: dw61204 on January 18, 2013, 09:52:44 PM

Hello,

 

I'm using a LS-WX2.0TL/R1 set to RAID 1.

 

I recently noticed the red Info/Error light flashing red....one long flash, then three quick flashes.  I logged into the interface and noticed an error on drive 2.  I had a blank spare drive with the same specs, so I removed the failing drive and put in the fresh drive. 

 

After a reboot, the Info/Error lights still blink in the same pattern.  Now after a few minutes the unit reboots itself.  Eventually, after a few reboots, the unit completely shuts down and I have to pull the power cord to get it to start up again.  Then the cycle repeats itself. 

 

I can no longer log into the interface.  I can still ping the unit without a problem.

 

Any help anyone can provide would be appreciated.

Text only | Text with Images
Browser ID: smf (is_webkit)
Templates: 1: Printpage (default).
Sub templates: 4: init, print_above, main, print_below.
Language files: 1: index+Modifications.english (default).
Style sheets: 0: .
Hooks called: 45 (show)
Files included: 27 - 1055KB. (show)
Memory used: 734KB.
Tokens: post-login.
Queries used: 10.

[Show Queries]